Table plasma cutter, bench CNC plasma Cutter MS-BL by Meisar CNC is specially designed for thin metal sheet cnc cutting.It provide the global fabrication shops thin metal sheet with the most free from worry and laser similar CNC cutting solutions.
Table Plasma Cutter Advanced Structure
1.>Dual driving gantry structure,release gravity and stress,ensure good condition in long life.
2.>Reasonable size:1.25*2.5m;1.5m*3.0m.
3.>Overall structure,release you from basis and cutting platform manufacturing.
4.>Taiwan linear guide+lift rail/Taiwan linear guide+slant G7 rack and pinion,Powerful step/Panasonic Servo+Planetary gear box;perfect running precise and stable transmission.
5.>Ball screw torch height controller,accuracy and safe.
6.>Delivery in installed condition,no installation at client's site.
7.>DXF/DWG files programming and auto nesting,USB data transmission.
8.>With water tank,greatly decrease dust and fume to envirement and operator.
RFQ:Can add oxy fuel cutting way for this type of Table Plasma Cutter?
A:No.The design of MS-BL is specially for plasma cutting only;if want to be cnc oxy fuel and plasma cutting both or cnc oxy fuel cutting only,please consider our cnc cutting table MS-BH.
RFQ:Is this Table Plasma Cutter with the fume exhausting?
A:Fume exhausting is optional, basic configuration is water tank way for fume decreasing and operator envirement protection.
RFQ:What is the cutting thickness of this plasma cutting table?
A:Depending on the adopted NC plasma cutter(generator),normally is 0-25mm and due to cutting too much thick could break the table structure, recommend you to cut regularlly no more than 20mm.
There are popular China made top quality NC plasma generators, such as LGK-120IGBT with cutting thickness 0.1-18mm,and LGK-200IGBT with cutting thickness capacity 0.3-25mm. Meanwhile,also can adopt the USA Hypertherm made plasma cutter/generator,say,Power max 65,Power max 85,Power max 105, Power max 125.
Table Plasma Cutter Parameter Outlook
|
Bench CNC plasma cutting machine MS-BL |
|
|
Effective Cutting Width |
1.5m |
|
Effective Cutting Length |
3.0m (can adjust) |
|
Cutting Mode |
Plasma only |
|
Cutting Material |
Carbon Stainless Alloy steel, Aluminium, Zinc etc |
|
Plasma Cutting Thickness |
0.1-25mm(recommended) |
|
Cutting Speed |
0-6500mm per minute |
|
Optional item |
Japan Panasonic servo |
|
NC Plasma generator |
|
Hot Tags: table plasma cutter, China table plasma cutter manufacturers, suppliers, factory, Cnc Plasma Cutting Table, Portable Cnc Plasma, , Cnc Plasma Table, Cnc Plasma Cutter
