CNC Table Plasma Cutter is for the metal sheet cutting, it is via the X and Y moving to get the shape cutting.
CNC table plasma cutter feature:
-
1. X is beam direction, Y is rail direction, it is via X and Y moving to get shape figures.
-
2. It comes fully assembled. CNC controller, beam and rail, cutting table, plasma source etc all are assemble well, assemble testing, assemble packing and delivery.
-
3. CNC Table plasma cutter will arrive completely pre-assembled. Therefore, you do not need to spend hours building or determining how to get the alignment right.
-
4.The CNC Table plasma cutter also included a water bath! So no dust and smoke when working with this machine.
-
5. Easy to use... CNC Table plasma cutter has software for X axis and Y axis moving design that is easy-to-use, it allows the user to design or plot out a XY moving cutting job using any computer. Also, you can load the designs using a USB stick.
-
CNC table plasma cutter simple specification
|
CNC Table plasma cutter MS-B |
|
|
Effective Cutting Width |
1.25-1.5m |
|
Effective Cutting Length |
2.5-3.0m (can adjust) |
|
Cutting Mode |
Plasma only (Not available for oxyfuel cutting) |
|
Cutting Material |
Carbon Stainless Alloy steel, Aluminium, Zinc etc |
|
Plasma Cutting Thickness |
0.1-25mm(recommended) |
|
Cutting Speed |
0-6500mm per minute |
Why do we need CNC plasma cutter machine? What are the advantages of plasma cutting and CNC plasma cutting?
Plasma cutting is an efficient metal cutting method for sheet metal and metal tubes, which has made it to be widely used in many different industries.
You can get benefits from 10 best advantages with fast cuts, ease of use, lower cost, safe to use, multi-tasking, expanded versatility, wide range of material and thickness, eliminated plate warping, raised inside piercing speed, and diminished dross.
Compared with traditional semi-automatic and manual cutting method, CNC metal cutter has greatly improved the efficiency and quality.
CNC plasma cutting is a computer controlled plasma cutting machine. It performs automatic, full-time, high-quality, high-utilization and efficient cutting according to the CNC nesting software.
In industrial production, metal thermal cutting generally includes gas cutting, plasma cutting, and laser cutting. Compared with gas cutting, plasma cutting has a wider cutting range and higher efficiency. The fine plasma cutting technology is close to the quality of laser cutting in terms of the cutting surface quality of the material, but the cost is much lower than that of laser cutting. It has shown great advantages in saving materials and improving labor productivity. This has promoted the development of plasma cutting technology from manual or semi-automatic to numerical control, and has become one of the main directions of the development of numerical control cutting technology.
1. It can cut thicker metals, such as stainless steel, aluminum and its alloys, copper and its alloys, cast iron and other metal materials. You can also use a non-transferred plasma arc cutting gun to cut non-conductive non-metallic materials and insulating materials with a cutting thickness of more than 150mm.
2. The cutting speed is fast, and the production efficiency is high, especially when cutting thin metals with high power, the production efficiency is improved more significantly.
3. The cutting quality is high, the slit is smooth and flat, the incision is narrow, and the heat-affected zone and deformation are smaller than other cutting methods.
4. Low cost, due to the high speed, the use of cheap gas such as nitrogen requires less raw materials and labor than other methods to cut the same material.
Hot Tags: cnc table plasma cutter, China cnc table plasma cutter manufacturers, suppliers, factory, Microstep cnc, crossbow esab, Cnc Plasma Table, Cnc Plasma Cutting Table, LGK 120 plasma, Cnc Flame Cutting
