Multi Heads Flame Cutting Machine

A multi-head flame cutting machine is high-efficiency gas flame cutting equipment that uses oxygen and acetylene as cutting fuel.
   

The multi-head flame cutting machine is mainly the use of multiple flame torches( CNC flame heads and or strip flame heads ) to cut the steel plate evenly according to the cutting to be evenly cut into strips and parts, because both sides can be heated at the same time, effectively preventing the steel plate from being heated on one side and caused by thermal deformation.

Generally speaking, if you are required to cut three straight strips, you must use four guns to cut. If you are required to cut N straight strips, you must be equipped with N + 1 cutting guns. If you are required to cut special-shaped workpieces or irregular picture parts, It is required to be equipped with CNC flame torches. The main application industries are steel market blanking, shipyards, wind turbine factories, steel structure factories, etc.

Feature of our multi heads flame cutting machine with others:

   1.Beam: with good rigidity, high precision, weight light, small inertia characteristics. All weldings are vibration aging destress treatment, effectively prevent structural deformation;

    2. Vertical, horizontal drive: are using precision gear rack (7 level accuracy) transmission. Horizontal rail using Taiwan linear rail, vertical guide is made of precision-processed characteristics of steel rail, to ensure the smooth operation of the cutting machine, high precision, and durable, clean and beautiful;

    3. Vertical drive frame (end frame): both ends are equipped with horizontal guide wheel, can adjust the bottom of the drive frame eccentric wheel to the rail compression degree, so that the whole machine in motion to maintain a stable direction;

    4. The drive system is the world's top products - Japan's Panasonic servo drive system drive technology, so that the whole machine running smoothly, speed range is wide, short acceleration time;

    5. Easy to use automatic programming system, so that CNC programming is no longer complex;

Hubei Meisar CNC Multi Heads Flame Cutting Machine product technical performance indicators:

    1. Cutting shape: programmable cutting straight lines and arcs composed of any shape flat steel plate parts;

    2. Cutting accuracy: national standard JB/T10045.3-99;

    3. Cut width: horizontal span 4000mm, effective cutting width of 3000mm, can be extended according to customer demand;

    4. Track length: track length 9000mm, effective cutting length of 7000mm, can be extended according to customer demand;

    5. The minimum width of the strip: 80mm;

    6. Cutting thickness: flame cutting thickness 5-200mm, more than this thickness needs to be custom-made;

    7. Torch system number: Strip torch system 9 sets more or less, cnc type cutting system 2 sets more or less;

    8. Ignition up: CNC special type cutting using automatic ignition, capacitive automatic THC.

    9. CNC programming: based on AutoCAD fully automatic graphical programming software;

    10. File transfer: with USB interface;

    11. Cutting gas: oxygen, acetylene or propane;

    12. Speed range: 0---3500mm/min (mm/min).

Multi Heads Flame Cutting Machine by Hubei Meisar CNC General specification:

Multi head flame cutting machine is also divided into types, are used for steel plate cutting.
1. The simplest multi-head straight line flame cutting machine, can evenly divide the steel plate into one, simple practical, low price.
2. In addition to the simple multi-headed line cutting function, horizontal also added a flame cutting gun, so both can cut the straight line, can also cut the line, the function is stronger, but in most cases, in order to save costs, often also use the manual horizontal cutting!This cost is even more expensive than the first one!
3. Multi-head control flame cutting machine, this is the most powerful function at present, and the most advanced, so the price is also the most expensive, in addition to the main function of one and two, there is also a strong numerical control differential cutting capability.

You also can contact us with your factual cutting requirement, then we can offer you the most suitable recommendation.

Hot Tags: multi heads flame cutting machine, China multi heads flame cutting machine manufacturers, suppliers, factory, Flame Cnc Cutting System, Gantry Flame Cutting, Gantry Cnc Flame Cutting Machine, Pipe Flame Cutting Machine, Multi Heads Flame Cutting Machine