We uphold a consistent level of professionalism, quality, credibility and repair for Table Metal Cnc Cutting, Dragon Pipe Cutting Plasma, Square Pipe Plasma Cutting. We have our own sales team, design team, technical team, QC team and package team. In the future, we will certainly live up to expectations and do our best to lead the industry into a new stage of development. The products we sell are subjected to strict quality testing and are priced affordably, while ensuring functionality and quality. If you will need more information and are interested in any of our solutions, be sure to feel free to contact us.
CNC plasma flame cutting machine main components and Hubei Meisar CNC made advantages:
The main components of Hubei Meisar cnc gantry cutting machine are divided into three blocks: mechanical structure, system electrical components and transmission parts!
Generally speaking, detailed CNC flame cutting machine and CNC plasma cutting machine component is basically the same.
Mechanical structure is mainly composed of: rack (welding composition), seat, rail, control cabinet, torch, etc. , these components are hard parts, in addition to cutting gun transmission and electrical parts of the relatively complex professional, other components.
CNC plasma flame cutting machine gantry features:
1. Hubei Meisar CNC adopts the box welding structure, material uses 8mm national standard steel plate after laser cutting, hige precison.
2. The frame upper surface and back used the bending machine to break into 90 degrees arc, this greatly increase the whole machine beam rigidity, lengthens the service life.
3.The front of frame is with 18mm steel plate after welding with the entire surface of the planer, greatly reduce the total deformation of the machine, improve the accuracy of the machinery, the whole machine is by heat treatment to eliminate stress, with good rigidity, not deformation, high precision, light weight, small inertia characteristics.
CNC plasma flame cutting machine Meisar CNC System and transmission feature:
1. It is the brain of CNC cutters; all signals are issued by the numerical control system instructions; through electronic signals, each transmission part and the electronic part to start working are more mature and stable, but only part of the electronic source accessories will be with the use of time; there is a certain loss of life, so there is a certain frequency of replacement; pay attention to the line and electrical work; light link maintenance! It's very important!
2. Transmission part: refers to the drive motor and gearbox, gear rack operation! Generally speaking, this part is relatively stable and rarely goes wrong! Usually pay attention to lubrication, maintenance, moderate scheduling contact friction situation maintenance, it can be!
3. Hubei Meisar CNC longitudinal drive frame (support frame): The two ends are equipped with a horizontal guide wheel, which can adjust the clamping degree of the eccentric on the bottom of the drive frame so as to keep the whole machine in a stable direction in the movement. Equipped with track dust collectors, at any time to scrape debris accumulated on the guide surface.
4. Hubei Meisar CNC longitudinal and transverse drive: all have precision gear racks to drive. Cross-guide rail using a precision cold-drawn guide plate; longitudinal guide is train rail-type rail through the precision processing; deceleration device is using a Taiwan-imported precision gear reducer to ensure cutting quality during the same-direction cutting.
Hubei Meisar CNC CNC plasma flame cutting machine main specifications:
|
Gantry cnc plasma and oxyfuel cutting machine MS-G |
|
|
Beam Width (X axis) |
3.0m-8.0m |
|
Rail Length (Y axis) |
6m(can be lengthened) |
|
Effective Cutting Width |
3.0m(3.2m for single torch) |
|
Effective Cutting Length |
4.0m |
|
Cutting Mode |
Flame and/or Plasma |
|
Cutting Material |
Carbon Stainless Alloy steel, Aluminium, Zinc etc |
|
Flame Cutting Thickness |
5-300mm |
|
Plasma Cutting Thickness |
Depending on the plasma generator |
|
Cutting Speed |
0-6500mm per minute |
|
Optional item |
Extra plasma/flame cutting head |
| Optional item |
NC Plasma generator |
Our company combines international advanced technology, constantly exploring in practice, and has always been in a leading position in Zhouxiang Gantry Type Metal Plate CNC Flame Plasma Cutter industry. If you wish to get more details about our company, You should contact with us now! We take 'excellent quality, accurate delivery, and considerate service' as our promise, and look forward to sincere cooperation with you!
Hot Tags: cnc plasma flame cutting machine components, China cnc plasma flame cutting machine components manufacturers, suppliers, factory, Pipe Bevel Machine Cutter, Cnc Plasma Cutter, Cnc Cutting Machine Parts, Gantry Type Cnc Plasma And Flame Cutting Machine, Small Plasma Cutter, Gantry CNC Cutting Machine
