We have established long-term and stable cooperative relations with many retailers and agents, and we can customize the size and specifications of Cnc Cutting Machine System, Pipe Cnc Cutting Machine, Good Portable CNC Plasma Cutter Selection according to customer requirements. In order to control the rate of service complaints and to make the dissatisfaction rate lower than one in ten thousand, we record and deal with customer-reported problems without fail. We have a strong production capacity, and guaranteeing the delivery time is our eternal commitment to our customers. With high-quality products and perfect services, our company has won the trust and attention of consumers.
CNC plasma flame cutting machine main components and Hubei Meisar CNC made advantages:
The main components of Hubei Meisar cnc gantry cutting machine are divided into three blocks: mechanical structure, system electrical components and transmission parts!
Generally speaking, detailed CNC flame cutting machine and CNC plasma cutting machine component is basically the same.
Mechanical structure is mainly composed of: rack (welding composition), seat, rail, control cabinet, torch, etc. , these components are hard parts, in addition to cutting gun transmission and electrical parts of the relatively complex professional, other components.
CNC plasma flame cutting machine gantry features:
1. Hubei Meisar CNC adopts the box welding structure, material uses 8mm national standard steel plate after laser cutting, hige precison.
2. The frame upper surface and back used the bending machine to break into 90 degrees arc, this greatly increase the whole machine beam rigidity, lengthens the service life.
3.The front of frame is with 18mm steel plate after welding with the entire surface of the planer, greatly reduce the total deformation of the machine, improve the accuracy of the machinery, the whole machine is by heat treatment to eliminate stress, with good rigidity, not deformation, high precision, light weight, small inertia characteristics.
CNC plasma flame cutting machine Meisar CNC System and transmission feature:
1. It is the brain of CNC cutters; all signals are issued by the numerical control system instructions; through electronic signals, each transmission part and the electronic part to start working are more mature and stable, but only part of the electronic source accessories will be with the use of time; there is a certain loss of life, so there is a certain frequency of replacement; pay attention to the line and electrical work; light link maintenance! It's very important!
2. Transmission part: refers to the drive motor and gearbox, gear rack operation! Generally speaking, this part is relatively stable and rarely goes wrong! Usually pay attention to lubrication, maintenance, moderate scheduling contact friction situation maintenance, it can be!
3. Hubei Meisar CNC longitudinal drive frame (support frame): The two ends are equipped with a horizontal guide wheel, which can adjust the clamping degree of the eccentric on the bottom of the drive frame so as to keep the whole machine in a stable direction in the movement. Equipped with track dust collectors, at any time to scrape debris accumulated on the guide surface.
4. Hubei Meisar CNC longitudinal and transverse drive: all have precision gear racks to drive. Cross-guide rail using a precision cold-drawn guide plate; longitudinal guide is train rail-type rail through the precision processing; deceleration device is using a Taiwan-imported precision gear reducer to ensure cutting quality during the same-direction cutting.
Hubei Meisar CNC CNC plasma flame cutting machine main specifications:
|
Gantry cnc plasma and oxyfuel cutting machine MS-G |
|
|
Beam Width (X axis) |
3.0m-8.0m |
|
Rail Length (Y axis) |
6m(can be lengthened) |
|
Effective Cutting Width |
3.0m(3.2m for single torch) |
|
Effective Cutting Length |
4.0m |
|
Cutting Mode |
Flame and/or Plasma |
|
Cutting Material |
Carbon Stainless Alloy steel, Aluminium, Zinc etc |
|
Flame Cutting Thickness |
5-300mm |
|
Plasma Cutting Thickness |
Depending on the plasma generator |
|
Cutting Speed |
0-6500mm per minute |
|
Optional item |
Extra plasma/flame cutting head |
| Optional item |
NC Plasma generator |
Facing the fiercely competitive market, we take 'honesty, truth-seeking, innovation and service-oriented' as our corporate tenet, and through scientific management, we have become a leader in the Economical Gantry CNC Plasma and Flame Metal Cutters industry. We always grasp the pulse of the development trend of the international industry, deeply understand the future trend of the market and understand the real needs of consumers. We cleave to the operating principles of quality and abiding by contracts, and the corporate spirit of unity and dedication, pioneering and innovative, and service-oriented.
Hot Tags: cnc plasma flame cutting machine components, China cnc plasma flame cutting machine components manufacturers, suppliers, factory, Pipe Plasma Cutting Machine, Pipe And Sheet CNC Cutting Machine, Plasma Pipe Cutting Unit, Plasma Pipe Cutting Machine, Stainless Steel Pipe Cutting Machine, Pipe Cnc Gas Cutting
