After years of accumulation and development, we have now become a comprehensive enterprise of Tube Cutting Machine, Pipe Groove Cutting Machine, Multi Heads Flame Cutting Machine integrating R&D, production, supply and marketing, and customer service. Our team concept:only the product that takes the customer as the basis and creates value for the customer is the real product in the sense. After years of hard work and development, our company has a deep accumulation in the industry and has obtained good reputation. Customer satisfaction is our eternal pursuit. Our company always adheres to the service concept of winning customers with quality and integrity, and unswervingly follows the road of brand development strategy. We sincerely welcome you to pay a visit to our company or speak to us for cooperation!
Firstly, what is the flame cutting of cnc flame cutter?
The flame cutting process of the CNC flame cutter is a thermal cutting process that locally heats the material to the ignition temperature and then burns. In that temperature the cutting oxygen flow, the heat generated by the heating flame and the heat of the material burns in the cutting oxygen air flow (the minimum purity of cutting oxygen is 99.5%). This combustion process is self-diffusion in the depth and direction of oxygen injection, and the residue produced by combustion is catapulted by the injection force of the cutting oxygen, thus forming a cut seam.
Secondly, What material requirements for CNC flame cutter cutting?
In order to be suitable for flame cutting, the material must meet the following requirements:
(1) When the material is heated to the ignition temperature, it must be able to burn in the oxygen flow.
(2) The ignition temperature of the material must be below its melting point.
(3) The melting point of the oxide must be lower than the combustion temperature of the material, so that the oxide can be sprayed by oxygen injection.
(4) The combustion heat of the metal must be as large as possible, and the thermal conductivity should be as low as possible.
Gemerally, the mild and mid carbon steel is as required.
MeisarCNC CNC Flame Cutter Functions:
● Compact keyboard design and easy to input files.
● Shape have some operations such as Proportion, Rotate, and Mirror.
● Shape can be arrayed in matrix, interaction, stacked modes.
● Steel plate can be adjusted according to any steel side.
● Coordinate system can be customized to support the two dimensional coordinates of all eight kinds.
● All input and output port type and the number can be customized (normally open or normally closed).
● Self-diagnostic function, to diagnose the key status and all the IO status, facilitate inspection and debug.
● Provide a front USB interface for copying files.
● System can be upgraded by USB interface easily, and we provide lifetime upgrade service.
● All functions and techniques can upgrade online and don’t worry about the after sale service.
● Import and export files by single or all files.
● Parameters backup and parameter restore.
● Support the Flame, Plasma, Marker and Demonstration four kinds of mode.
● Including various types of processing parameters to meet the needs of different processes.
● Flame and Plasma are separated in the control IO ports.
● Support THC(Torch Height Control), two-level preheat, three-level pierce in flame mode.
MeisarCNC CNC Flame Cutter Advanced Structure:
1.Mid gantry Box shape and dual driving gantry structure, release gravity and stress, ensure good condition in long life.
2.Cross-beam adopts the box welding structure, material uses 8mm national standard steel plate after laser cutting, the frame upper surface and back used the bending machine to break into 90 degrees arc, greatly increase the whole machine beam rigidity, lengthens the service life.
3.The front of frame is with 18mm steel plate after welding with the entire surface of the planer, greatly reduce the total deformation of the machine, improve the accuracy of the machinery, the whole machine is by heat treatment to eliminate stress, with good rigidity, not deformation, high precision, light weight, small inertia characteristics.
4.Reasonable gantry size:3.0m-3.5m, suitable all kinds of metal sheet.
5.Divided basis and cutting platform, good rigidity, easy installation and disassemble, not weight limit to cutting material.
6.Longitudinal drive frame (support frame): The two ends are equipped with a horizontal guide wheel, which can adjust the clamping degree of the eccentric on the bottom of the drive frame, keep the whole machine in a stable direction in the movement. Equipped with track dust collectors, at any time to scrape debris accumulated on the guide surface.
7.Taiwan linear guide+fine finished train rail+G6 rack and pinion, Powerful step/ Panasonic Servo+Planetary gear box; perfect running precise and stable transmission. Longitudinal and transverse drive all have precision gear rack to drive. Cross-guide rail using precision cold-drawn guide plate, longitudinal guide is train rail-type rail through the precision processing, deceleration device is using Taiwan imported precision gear reducer, to ensure cutting quality during the same-direction cutting.
8.> Ball screw torch height controller, accuracy and safty.
9.> Separated Electric cabinet and CNC controller, safe operation, easy maintaince.
MeisarCNC CNC Flame Cutter Parameter Outlook
Gantry CNC oxyfuel cutter MS-G | |
Beam Width (X axis) | 3m-10m |
Rail Length (Y axis) | 6m(can be lengthened) |
Effective Cutting Width | Above 2.2m(2.4m for single torch) |
Effective Cutting Length | Above 4.5m |
Cutting Mode | Flame and/or Plasma |
Cutting Material | Carbon Stainless (Plasma for Alloy steel, Aluminium, Zinc etc) |
Flame Cutting Thickness | 5-300mm |
Plasma Cutting Thickness | Depending on the plasma generator |
Cutting Speed | 0-6500mm per minute |
Optional item | Extra plasma/flame cutting head |
Japan Panasonic servo | |
NC Plasma generator | |
Cutting samples by Meisar cnc flame cutting machines
Meisar CNC manufactures kinds of cnc flame cutting machines, welcome to contact meisarcnc@meisarcnc.cn +86 15171412223
MeisarCNC CNC Flame Cutter Parameter Outlook
Gantry CNC oxyfuel cutter MS-G | |
Beam Width (X axis) | 3m-10m |
Rail Length (Y axis) | 6m(can be lengthened) |
Effective Cutting Width | Above 2.2m(2.4m for single torch) |
Effective Cutting Length | Above 4.5m |
Cutting Mode | Flame and/or Plasma |
Cutting Material | Carbon Stainless (Plasma for Alloy steel, Aluminium, Zinc etc) |
Flame Cutting Thickness | 5-300mm |
Plasma Cutting Thickness | Depending on the plasma generator |
Cutting Speed | 0-6500mm per minute |
Optional item | Extra plasma/flame cutting head |
Japan Panasonic servo | |
NC Plasma generator | |
The According to ISO9013 Flame Cutting Service produced by the company enjoys a good reputation in our industry and customer groups. We want to blaze a path of innovation, development, and integrity. Adhering to the tenet of 'excellent quality, perfect service and benefit sharing', we give full play to our technical advantages and constantly pursue excellence.
Hot Tags: cnc flame cutter machine, China cnc flame cutter machine manufacturers, suppliers, factory, Air Cnc Plasma Cutting, Hypertherm Plasma Cnc Cutting Machine, Cnc Plasma Tube Cutting Machine, Portable Metal Cnc Cutting, Pipe Gas Cutting Machine, Auto Cad Plasma Cutting Machine
