CNC cutter linear guide maintenance method
We in the daily maintenance also pay attention to the cnc cutting machine linear guide maintenance work to ensure better operation of equipment, the specific method is as follows:
1. Unplug the total power supply of CNC cutting machine, press several times CNC cutting machine switch, release the static electricity.
2. Remove the rails of the CNC cutter. Carefully wipe the oil and backlog of waste on the surface of the rail with a rag.
3. Apply a little grease to the surface of the linear rail with your fingers, giving priority to the groove.
4. Use a few drops of lubricant on top of the linear rail, and then move the linear guide back and forth several times to ensure that the whole body of the rail is lubricated.
5. Put the straight rails on. Then turn on the total power supply of the CNC cutter and press the switch of the CNC cutter.
