Plasma Cutter CNC machine MS-P
Plasma cutter CNC machine MS-P Introduction:
- Light weight and portable.
- Strong beam, working stable, effective shielding plasma high-frequency interference.
Light but strong beam, stable - Support flame and or plasma cutting.
- Affordable price, standard configuration at around USD1300 only.
- Simple structure and design, easy to operate;
- High cutting quality, high cutting precision.
- Full English interface and English operation, English manuals etc
Plasma cutter CNC machine MS-P CNC System:
- CNC Specification:
Item Type: Cutting Machine Control System
Number of Control Axes: 2-axes linkage
Control Accuracy: ±0.001mm
Coordinate Range: ± 99999.99mm
Maximum Pulse Frequency: 200KHz; maximum operating : 15 meters / minute
Maximum Number of Program Lines: 150,000 lines
Maximum Single Program: 4M
Time Class Resolution: 10ms
System Working Power: DC +24V DC power input, power is greater than 80W.
System Working Environment: Temperature -10 ° C to +60 ° C; relative humidity 0-95% without condensation
Drive Arc Voltage Increase Motor Maximum Power: 45W (Note: with T system)
- CNC Interface:
15-core male two- motor drive interface
16-core female 16-channel opto-isolated output, maximum sink current 300mA
25-core male 16-channel opto-isolated input, maximum input current 300mA
The front panel has a built-in USB interface for the user to transfer the cutting code
- CNC Environmental Requirements:
The numerical control system is suitable for working at an ambient temperature of 0 ° C to 50 ° C, and a relative humidity of 5-95% without condensation.
Plasma cutter CNC machine MS-P specifications:
|
Plasma cutter CNC machine MS-P |
|
|
Beam Width (X axis) |
2.0m |
|
Rail Length (Y axis) |
3.5m(can be lengthened) |
|
Effective Cutting Width |
1.5m |
|
Effective Cutting Length |
3.0m |
|
Cutting Mode |
Plasma / Plasma and flame |
|
Cutting Material |
Carbon steel, Stainless steel, Alloy steel, Aluminium, Zinc etc |
|
Flame Cutting Thickness |
5-120mm |
|
Plasma Cutting Thickness |
0.3-25mm or Depending on plasma generator |
|
Cutting Speed |
0-6500mm per minute |
|
Optional item |
Extra plasma/flame cutting head |
|
LGK-100IGBT, LGK-120IGBT, LGK-200IGBT, Hypertherm Plasma Cutter Etc |
|
Hot Tags: Plasma Cutter CNC, China Plasma Cutter CNC manufacturers, suppliers, factory, Automatic Metal Cutting Machine, FLMC F2100b cnc, Portable Metal Cutter, Portable Cutting Machine For Aluminium, Portable Cnc Metal Cutting Machine, Automatic Sheet Cutting Machine
