The use and maintenance of vertical rails of CNC cutters
The use and maintenance of vertical orbits of CNC cutters
When we talk about the cutting of CNC cutters, we often control the thermal deformation of materials caused by flame cutting methods to reduce the impact of the cutting process on the accuracy of material processing. Then use the vertical orbit of the CNC flame cutter. Does long-term use of an integral part of the device have a thermal deformation effect?
CNC cutter users can produce such an association. We can think of some concerns. Whether from the manufacturing process or structural design, large CNC cutting machine vertical guide rail and rail frame installation will use special treatment methods to reduce the future long-term use of the process of thermal deformation may occur, but on the other hand, NC flame cutter track and frame deformation is not only one aspect of thermal deformation, the long-term rolling frame and gear rack wear is likely to lead to deformation. Take the Dragon Gate CNC flame cutter as an example. Then a queen bed moves back and forth on it, and over a long period of time it deforms.
Of course, we can't say that the rails of the CNC flame cutter can't be deformed. This deformation is corresponding to the deformation. Friends with physics studies know the principle of thermal expansion and contraction, it can be said that CNC cutting machine rails are a bit exaggerated, if the customer buys the rails are 18m or 24m. No manufacturer can guarantee that the height of the two rails is exactly the same. They are two completely parallel rails that are always staggered or slightly worse. So does this mean that if we choose to buy an 18-meter-long track, the CNC flame cutter is defective?
