CNC pipe cross cutting machine need to consider points when you select 
Select CNC pipe cross line cutting machine or called cnc pipe intersection cutting machine need to consider from these aspects:
First, the need to cut the range of pipe diameter
According to the cutting pipe diameter range to select the corresponding parameters to choose the specifications of the pipe cross-line cutting machine, in general, all manufacturers produce and manufacture the cross-line cutting machine is non-standard, according to different customer requirements to configure the type of cross-line cutting machine, the conventional pipe cutting diameter range is 60-630mm, 60-800mm, 108-1000mm, 219-1200mm, 325-1600mm, 630-2000mm, Basically this write tube diameter can meet all the industry's cutting diameter range, of course, the larger the cutting diameter, the equipment model is not the same, so the price will be different.
Second, cutting pipe material and wall thickness size
According to the pipe material and wall thickness to choose the appropriate cutting method, if the pipe material is ordinary carbon steel wall thickness in more than 25, you can choose the flame to cut, so the way of cutting relative to plasma cutting costs to be cheap, such as pipe material is ordinary carbon steel, thickness in 25 recommended to choose plasma to cut, such cutting speed, cutting quality than the flame cost is higher, if the accuracy is higher recommended to choose laser or laser, But if the laser has a diameter of more than 240mm, the laser is 3-4 times taller than the plasma.
Third, the number of moving axes of the cross-line cutting machine
The customer's cutting requirements for the pipe to choose the number of shafts of the cross-line cutting machine, the need to choose the number of moving shafts on the number of bee ends need to choose five axes, the need to cut the square tube needs to cut the round tube and all need the bee to choose the number of moving shafts is eight axes, such as just cut or cut a variety of mouth types and do not need bee not to choose the number of moving axes can be.
Fourth, the cross-cutting software part
Each manufacturer's cutting software has its own characteristics, their main difference is that the use of cross-line programming software above, snbsp; our company uses cutting software is independent research and development, we have their own research and development team in Shanghai, software can be upgraded free of charge, this is all domestic manufacturers can not achieve, and our software program speed is fast, the error rate is low, my company designed cutting software compatible with many third-party software, can also be directly edited CAD map on the device.
Fifth, the cross-line cutting machine hardware part is also essential
