The characteristics of fine plasma cutting machine
For fine plasma cutting machine, it is in fact to a large extent able to cut out different shapes on the more complex work pieces, and, on the other hand, for fine plasma cutting machine in the use of, in fact, it will be relatively fast in the cutting speed, efficiency will be relatively high, on its cutting surface quality is actually better, cutting size is also very accurate, work parts thermal deformation situation is small.
For the fine plasma cutting machine parts, it actually does not need to be machined, in this respect, it is actually directly to welding and application. However, for CNC plasma cutting machine, it is actually the use of plasma arc to cut, but in comparison with oxygen cutting will actually have certain defects.
CNC plasma cutting machine manufacturers talk about plasma arc to cut, mainly will be reflected in its cutting surface tilt is relatively large, finish is actually no oxygen cutting good. Next, we are actually to pay attention to, for the assessment of fine plasma cutting machine cutting quality is good or bad, on its main judgment is mainly that will include the tilt of the cutting surface, there is the depth of its cut and how much of its hanging slag.
For a relatively high-quality cutting surface, its tilt should actually be below 30, in terms of its cutting depth is actually to be in O.15mm, and, on the other hand, it has very little slag and is easy to remove.
Automatic laser welding machine manufacturers introduced fine plasma cutting machine in the operation, on its voltage or current stability conditions, followed by, for the impact of fine plasma cutting machine cutting quality factors in addition to electrodes and the quality of its nozzle itself, the main reason is that there will be two aspects, in fact, there will be cutting mouth height and stability, and then, in fact, refers to the cutting speed and working pressure on the match.
