Prevent the pollution of CNC plasma cutting machine
In the course of working, the Cnc controlled plasma cutting machine will produce a variety of pollution, such as arc pollution, dust pollution, noise pollution, etc. In fact, as long as it is CNC cutting equipment there is this problem. So, how can we prevent all kinds of pollution caused by the work of the CNC plasma cutting machine? And listen to CNC CUTTER LIMITED / MEISAR CNC slowly: 
1, Arc radiation pollution prevention methods: arc radiation is mainly infrared radiation and visible radiation. The operator of the CNC plasma cutter must wear a hood and gloves to protect his face, hands and neck. Mask zui well-guarded lenses, cutting, can use water cutting methods, the use of water to absorb light radiation.
Prevention methods for dust and soot pollution: large gas flow during cutting, large amounts of vaporized metal vapor, ozone, nitrides, etc. during cutting. This causes a large amount of dust to lift. Therefore, it is necessary to configure good ventilation equipment, do a good job of dust protection measures. When cutting, the exhaust unit can also be placed under the grid workstation, or water cutting can be used to reduce dust.
The prevention method of noise pollution: CNC plasma cutting machine arc cutting will produce high-intensity, high-frequency noise, should use automatic cutting as far as possible, the operator works in the sound proofing chamber. The method of cutting in water and absorbing noise by using water can also be used. In addition, the use of water curtain torch can also greatly reduce noise.
The prevention method of electric shock: There is a risk of electric shock when operated manually. Therefore, the power supply of the CNC plasma cutting machine must be used to ensure good grounding, torch and hand touch part must be reliably insulated. The exposed switch sleeve must be covered with an insulated rubber sleeve to avoid direct hand contact with the switch.
The prevention method of electromagnetic field: High-frequency electromagnetics have certain harm to human body. The main prevention measures are: arc frequency selection in 20 to 60Hz is more appropriate, high-frequency oscillator with shield shield, work parts to ensure good grounding
