Here is some notice of dairly operation and maintance for cnc cutter of plasma or flame
MeisarCNC gantry CNC cutter machine with two flame heads and one plasma heads, span reach 6m!
Cnc cutters use the CNC system to follow the cutting trajectory to complete the entire cutting operation under the set cutting graphic strace. However, in practical applications, considering various factors such as the shape of the steel plate, the size of the cutting part and the thickness and material of the steel plate, where should the torch be placed on the steel plate?
In general, it is recommended that the user design cutting points at the edge of the steel plate. Using the edge as a cutting point will extend the life of the consumables, taking into account the preheating issue of flame cutting. At the same time, in order to improve the quality of the part cutting surface, it is recommended to increase the length of the lead to improve the cutting quality when cutting edge.
The cutting quality of the CNC cutter is related to the accuracy of the equipment on the one hand, and is directly related to the fire control and operation level of the </span>. The flame cutting effect varies depending on the cutting gas used. Once you buy two devices, the cutting effect of a cut workpiece is different. The reason is that the operator is unable to master the fire link.
To use a CNC cutter, first you need to master the fire control system. In terms of gas sources, most of the oxygen in the general enterprise processing site supplies oxygen to the pipeline, and the pressure and purity of the oxygen are usually sufficient. Cutting gases are mainly available in bottles. A 30 kg bottle can be used for 5 machines and 5 strands of water. The usage time is approximateto 2 hours. The pressure of the bottled gas fluctuates greatly, which directly affects the gas flow and the cutting quality. In addition, at the beginning and end of the use process, the pressure of the gas source of the bottled gas fluctuates greatly. This is a good way to use hot water in the field to ensure a stable air source.
To ensure the cutting quality of the CNC cutter, check the pipes and connectors regularly for leakage and aging, clean the bearings and rails and lubricate the oil, and clean the cutting nozzles and cooling pipes. It is necessary to complete regular procedures on a regular basis to ensure that the equipment is running properly and then to improve and improve the cutting effect. The regulation of the flame is related to other factors, especially for the type and thickness of the steel. This requires us to take care to summarize and accumulate experience in our daily work to enhance learning and research, and to master multiple aspects of knowledge.
More asking of plasma using way, flame using way, welcome to contact us: meisarcnc@meisarcnc.cn +86 15171412223
