A small CNC cutter equipped with a plasma power supply can cut stainless steel, aluminum, carbon steel, and mild carbon steel.
When using oxygen and fuel gas, the small CNC cutter is suitable for cutting mild carbon steel.
Small CNC cutter simple intruduction:
Cutting way: Oxy-Fuel and or Plasma cutting
Cutting material: Metal sheet, says, mild steel, stainless steel, zinc sheet Etc
Standard cutting area is 1500X3000mm
Max cutting area can reach 2200X15000mm
Small cnc cutter simple advantage:
1. Small: Light weight, easy to use and set up.
2. Cheap: cost around USD1400 for a standard one.
3. Powerful function: It can cut any figures that you can design using Auto CAD on metal sheet.
4. Flexible: Be used directly on the plate to be cut or mounted on a cutting table.
Small cnc cutter "Small" feature:
|
Electric Power |
110 or 220AC, 60/50Hz |
|
|
Effective Cutting Range |
Standard size: 1.5mX3.0m Customized size:Width: 1.0m, 1.5m,1.8m,2.0m Length: 3.5m, 4.5m, 5.5m…15.0m |
|
|
1.5mX3.0m Machine |
Net weight |
125kg |
|
1.5mX3.0m Machine |
Gross weight |
150kg |
|
1.5mX3.0m Machine |
Packing |
2 plywood boxes |
Small cnc cutter Cutting Parameters:
| Modes of Cutting | Plasma | Flame |
| Cutting Speed | 0-6500mm/min | 0-3500mm/min |
| Cutting Thickness | Depending on the plasma power source | 6mm-120mm |
| Torch Height Control(optional) | Automatic voltage THC | Electrice THC |
| Compatibility | Nearly all brands plasma supply | Built-in oxy-fuel torch |
Small cnc cutter Plasma power supply options:
- All the important parts in this plasma cutting machine like IGBT, diode, integrated circuit, relay, current and voltage regulator are world famous brand which have high reliability;
- Soft switch technology, improve the IGBT and it`s reliability;
- 100%(40ºC)duty cycle, it is suitable for long time, heavy load, high temperature and bad circumstances;
- Inverter control power source: Small volume, little weight and energy saving;
- Current up-slope function: Reduce the impact on striking arc and decrease consumption of cutting torch parts;
- Air pressure, hydraulic pressure sensor: Protect torch from being burnt efficiently;
- Machine type setting: Arc striking signal, arc pressure signal, air supply control and arc pressure output function makes it specially suitable for our small CNC cutter MS-P;
- Two machines parallel use is available, double the output current to cutting extra-thickness material well.
Hot Tags: small cnc cutter, China small cnc cutter manufacturers, suppliers, factory, Cantilever Cnc Cutting Machine, Ajan plasma, Portable Steel Cutting Machine, Honey Bee CNC Plasma Flame Cutting Machine, Automat Cutting Machine, Steel Profile Cutting Machine
