For the industry, the use of cnc plasma cutter can be said to be quite extensive and fully utilized in many fields, and the development of the device in the market is very good. Therefore, we must pay attention to the cnc plasma cutter equipment, especially in the winter, the cold weather is a big injury to the use of cnc plasma cutter, we must pay attention to the winter cnc plasma cutter antifreeze preparation work.
The cnc plasma cutter is designed for winter freeze protection.Although the effect of temperature on the cnc plasma cutter is not particularly large, since many users add butter to the screws, they forget to clean them in the winter, which causes them to not move every time they are turned on. The winter in the north is very cold and the temperature in the studio is very low, although the cnc plasma cutter still cannot move. At this point we must ensure that the temperature in the workplace reaches the low temperature of the fueling standard.
In the hot summer months, the cooling water in the cnc plasma cutte needs to be replaced every day to avoid exceeding the specified temperature. In the cold winter, many users will ignore this and think that the cold water temperature will not rise much. Therefore, many users often forget to change the water in the winter, because the outside temperature is very low, the motor of the spindle cnc plasma cutter is hard to feel. Therefore, we especially remind the user that the cooling water is a necessary condition for the normal operation of the motor of the spindle cnc plasma cutter. If the cooling water is too dirty, it will cause serious damage to the motor of the cnc plasma cutter, ensuring the cleaning of the cooling water and the normal operation of the pump.
